How to Set Up Your AMMSUN Beach Tent?

Nothing beats an idyllic beach day quite as quickly as too much sunlight!

A stable beach tent can help safeguard your beach party against UV rays (in addition to using sunscreen!) while offering much-needed shade.

Setting up a tent on the beach may seem intimidating at first, with all its poles and fabric to consider in an environment featuring intense sunshine, sandy shores, and that irritating sea breeze.

What if we told you beach tents, especially an AMMSUN beach tent, can actually be simple and quick to set up? With careful preparation you can create your perfect beach tent!

Are you ready to set up your AMMSUN beach tent quickly and effortlessly? Look no further - this guide has everything covered (just as your beach tent does!).

6 Easy Steps Before Enjoying AMMSUN Beach Tent

A.Beach Tent with Anchors

Ready? Spread Out! : Take out your AMMSUN beach tent and spread it out evenly on the ground.
Totally Fill Then Stretch: Once in place, fill the sandbags up as completely as possible before stretching; if not completely full, your tent might struggle in the wind. ( 1st TRETCH! ) pull the sandbags apart into an “X” formation to stretch fabric tightly.

Just Slide to Assemble: Assemble the aluminum poles together by sliding each section into its next.

Poles Up! Stretch Again! : Place the poles, with foam balls on top, against the fabric about 1 ft away from each corner, near the seam lines. ( 2nd TRETCH! ) pull the sandbags apart further to make the tent fabric as tight as possible, and adjust the poles as needed.

Twist and Connect: Twist the anchors into the ground beneath each pole and connect the poles to the anchors to keep everything secure.
Secure with Elastic Rubber Bands: Use elastic rubber bands to fasten tent fabric over foam balls on poles - further ensure everything remains in place.

B.Beach Tent without Anchors

Ready? Spread Out! : Take out your AMMSUN beach tent and spread it out evenly on the ground.
Totally Fill Then Stretch: Once in place, fill the sandbags up as completely as possible before stretching; if not completely full, your tent might struggle in the wind. ( 1st TRETCH! ) pull the sandbags apart into an "X" formation to stretch fabric tightly.
Just Slide to Assemble: Assemble the aluminum poles together by sliding each section into its next.
Poles Up! Position! : Place the poles, with foam balls on top, against the fabric about 1 ft away from each corner, near the seam lines. Determine the direction the wind is blowing and position the poles at a certain angle to counteract the wind force.
Stretch Again: ( 2nd TRETCH! ) pull the sandbags apart further to make the tent fabric as tight as possible, and adjust the poles as needed.
Secure with Elastic Rubber Bands: Use elastic rubber bands to fasten tent fabric over foam balls on poles - further ensure everything remains in place.

What Can I Do If My AMMSUN Shade Keeps Falling Over?

Completely Fill and Dig Holes: When placing sandbags outside in windy conditions, fill all available sandbags to capacity (completely full!). For even further security and optimum performance consider digging holes to place the sandbags inside them.

Pay Attention to the Direction of the Wind: To ensure maximum wind resistance, adjust the position and direction of the poles to counteract the wind force, helping to maintain stability. (specifically for tents without anchors; if your tent has anchors, you don't need to worry about this)

Stretch Then Realign: For increased stability, stretch the four sandbags out while realigning their poles for improved support.

Use Attached Black Elastic Rubber Bands: Use black elastic rubber band to secure tent fabric to the foam ball on each pole - this helps prevent poles from collapsing when fabric lifts from wind gusts.

Useful Tips for Your AMMSUN Beach Tent

Sunscreen Is the First Line of Protection: While AMMSUN shades provide UPF 50+ sun protection, for optimal sun safety it is wise to add additional UVA/UVB sunblock (sunscreen is a must) if you have sensitive skin.

Rinse the Pole: When sand enters the middle section of the pole, immediately flush with seawater in order to avoid connection problems and ensure continued functionality of its components. (The pole is made of aluminum - no worry about rusting!)

Avoid Scratches with the Small Transparent Bag: After use, store anchors in our designated small bag so as to avoid placing directly in the larger bag with tent fabric and avoid scratches on tent fabric.

Hand Wash If Possible: If necessary, handwash tent fabric. Machine washing could damage its UV coating; therefore it's wiser to opt for manual washing when possible.

By following these simple steps and tips, you can ensure your beach day is both relaxing and enjoyable. Your AMMSUN beach tent provides shade so you can unwind under its shelter while appreciating every moment under the sun!